dmesg - laptop system
microcode: microcode updated early to revision 0xcc, date = 2019-04-01
Linux version 4.12.14-lp151.28.10-default (geeko@buildhost) (gcc version 7.4.0 (SUSE Linux) ) #1 SMP Sat Jul 13 17:59:31 UTC 2019 (0ab03b7)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.10-default root=/dev/mapper/system-root splash=silent resume=/dev/system/swap mitigations=auto quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000063ca2fff] usable
BIOS-e820: [mem 0x0000000063ca3000-0x0000000063ca3fff] ACPI NVS
BIOS-e820: [mem 0x0000000063ca4000-0x0000000063ccdfff] reserved
BIOS-e820: [mem 0x0000000063cce000-0x0000000063d79fff] usable
BIOS-e820: [mem 0x0000000063d7a000-0x0000000064679fff] reserved
BIOS-e820: [mem 0x000000006467a000-0x000000007558efff] usable
BIOS-e820: [mem 0x000000007558f000-0x0000000075f7efff] reserved
BIOS-e820: [mem 0x0000000075f7f000-0x0000000077f7efff] ACPI NVS
BIOS-e820: [mem 0x0000000077f7f000-0x0000000077ffefff] ACPI data
BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
BIOS-e820: [mem 0x0000000079000000-0x000000007c7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004827fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x62cc8018-0x62cd8057] usable ==> usable
e820: update [mem 0x62cc8018-0x62cd8057] usable ==> usable
e820: update [mem 0x64685018-0x6468ce57] usable ==> usable
e820: update [mem 0x64685018-0x6468ce57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x0000000000087fff] usable
reserve setup_data: [mem 0x0000000000088000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000062cc8017] usable
reserve setup_data: [mem 0x0000000062cc8018-0x0000000062cd8057] usable
reserve setup_data: [mem 0x0000000062cd8058-0x0000000063ca2fff] usable
reserve setup_data: [mem 0x0000000063ca3000-0x0000000063ca3fff] ACPI NVS
reserve setup_data: [mem 0x0000000063ca4000-0x0000000063ccdfff] reserved
reserve setup_data: [mem 0x0000000063cce000-0x0000000063d79fff] usable
reserve setup_data: [mem 0x0000000063d7a000-0x0000000064679fff] reserved
reserve setup_data: [mem 0x000000006467a000-0x0000000064685017] usable
reserve setup_data: [mem 0x0000000064685018-0x000000006468ce57] usable
reserve setup_data: [mem 0x000000006468ce58-0x000000007558efff] usable
reserve setup_data: [mem 0x000000007558f000-0x0000000075f7efff] reserved
reserve setup_data: [mem 0x0000000075f7f000-0x0000000077f7efff] ACPI NVS
reserve setup_data: [mem 0x0000000077f7f000-0x0000000077ffefff] ACPI data
reserve setup_data: [mem 0x0000000077fff000-0x0000000077ffffff] usable
reserve setup_data: [mem 0x0000000078000000-0x00000000780fffff] reserved
reserve setup_data: [mem 0x0000000079000000-0x000000007c7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000004827fffff] usable
efi: EFI v2.40 by INSYDE Corp.
efi: SMBIOS=0x75802000 ESRT=0x7590c318 ACPI 2.0=0x77ffe014
SMBIOS 2.8 present.
DMI: LENOVO 80RJ/Lenovo B71-80, BIOS 0RCN30WW 09/21/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x482800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7800000000 write-back
1 base 0078000000 mask 7FF8000000 uncachable
2 base 0080000000 mask 7F80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0x78000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007590c318 to 0x000000007590c350.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000032000] 32000 size 24576
Using GB pages for direct mapping
BRK [0x0308c000, 0x0308cfff] PGTABLE
BRK [0x0308d000, 0x0308dfff] PGTABLE
BRK [0x0308e000, 0x0308efff] PGTABLE
BRK [0x0308f000, 0x0308ffff] PGTABLE
BRK [0x03090000, 0x03090fff] PGTABLE
BRK [0x03091000, 0x03091fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x3de75000-0x3fffafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000077FFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x0000000077FCB188 0000DC (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x0000000077FF0000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x0000000077FD5000 016C86 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x0000000077F7C000 000040
ACPI: UEFI 0x0000000077FFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x0000000077FFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MSDM 0x0000000077FFB000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000077FF7000 0030A9 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x0000000077FF6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBG2 0x0000000077FF5000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x0000000077FF4000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x0000000077FF3000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x0000000077FF2000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x0000000077FF1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x0000000077FEF000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: LPIT 0x0000000077FEE000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x0000000077FED000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x0000000077FEC000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000077FD4000 0002D4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000077FD1000 002BAE (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000077FD0000 000B39 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000077FCF000 000E58 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000077FCD000 001B02 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DMAR 0x0000000077FCC000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x0000000077FCA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BGRT 0x0000000077FC9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004827fffff]
NODE_DATA(0) allocated [mem 0x4827e7000-0x4827fcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004827fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x0000000000087fff]
node 0: [mem 0x0000000000100000-0x0000000063ca2fff]
node 0: [mem 0x0000000063cce000-0x0000000063d79fff]
node 0: [mem 0x000000006467a000-0x000000007558efff]
node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
node 0: [mem 0x0000000100000000-0x00000004827fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004827fffff]
On node 0 totalpages: 4158443
DMA zone: 64 pages used for memmap
DMA zone: 95 pages reserved
DMA zone: 3974 pages, LIFO batch:0
DMA32 zone: 7410 pages used for memmap
DMA32 zone: 474213 pages, LIFO batch:63
Normal zone: 57504 pages used for memmap
Normal zone: 3680256 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x00088000-0x000fffff]
PM: Registered nosave memory: [mem 0x62cc8000-0x62cc8fff]
PM: Registered nosave memory: [mem 0x62cd8000-0x62cd8fff]
PM: Registered nosave memory: [mem 0x63ca3000-0x63ca3fff]
PM: Registered nosave memory: [mem 0x63ca4000-0x63ccdfff]
PM: Registered nosave memory: [mem 0x63d7a000-0x64679fff]
PM: Registered nosave memory: [mem 0x64685000-0x64685fff]
PM: Registered nosave memory: [mem 0x6468c000-0x6468cfff]
PM: Registered nosave memory: [mem 0x7558f000-0x75f7efff]
PM: Registered nosave memory: [mem 0x75f7f000-0x77f7efff]
PM: Registered nosave memory: [mem 0x77f7f000-0x77ffefff]
PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
PM: Registered nosave memory: [mem 0x79000000-0x7c7fffff]
PM: Registered nosave memory: [mem 0x7c800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff]
PM: Registered nosave memory: [mem 0xffa10000-0xffffffff]
e820: [mem 0x7c800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 48 pages/cpu @ffff880482400000 s159744 r8192 d28672 u524288
pcpu-alloc: s159744 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4093370
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.10-default root=/dev/mapper/system-root splash=silent resume=/dev/system/swap mitigations=auto quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 3951048K/16633772K available (10256K kernel code, 1470K rwdata, 3484K rodata, 2096K init, 9888K bss, 584472K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
ftrace: allocating 34537 entries in 135 pages
Hierarchical RCU implementation.
RCU event tracing is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2400.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 32K
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000075e7b000 end: 0x00000075e9afff
DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
node 0 initialised, 3024563 pages in 44ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x63ca3000-0x63ca3fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x75f7f000-0x77f7efff] (33554432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 9:33:11, date: 07/24/19
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880471878000 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20121220)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880471899000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880471956480 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804718C5E00 000130 (v02 PmRef HwpLvt 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880471878800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804718C5800 000119 (v02 PmRef ApHwp 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804718C5200 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PC05] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xa132a000-0xa132afff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa132b000-0xa132bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa132e000-0xa132e0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xa132c000-0xa132c7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff]
pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa132d000-0xa132d0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
pci 0000:02:00.0: [8086:3166] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xa1100000-0xa1101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [mem 0xa1100000-0xa11fffff]
pci 0000:03:00.0: [1002:6660] type 00 class 0x038000
pci 0000:03:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xa1000000-0xa103ffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0xa1000000-0xa10fffff]
pci 0000:00:1d.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
Linux cec interface: v0.10
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x62cc8018-0x63ffffff]
e820: reserve RAM buffer [mem 0x63ca3000-0x63ffffff]
e820: reserve RAM buffer [mem 0x63d7a000-0x63ffffff]
e820: reserve RAM buffer [mem 0x64685018-0x67ffffff]
e820: reserve RAM buffer [mem 0x7558f000-0x77ffffff]
e820: reserve RAM buffer [mem 0x482800000-0x483ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs ETD0643 ETD0000 PNP0f13 (active)
system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0x7c800000-0x7c81ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [mem 0xa1100000-0xa11fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xa1040000-0xa105ffff pref]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0xa1000000-0xa10fffff]
pci 0000:00:1d.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa10fffff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 34328K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x66d1e000-0x6ad1e000] (64MB) mapped at [ffff880066d1e000-ffff88006ad1dfff]
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1563960795.224:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=37 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.5: Signaling PME with IRQ 123
pcieport 0000:00:1d.0: Signaling PME with IRQ 124
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x90000000, using 5628k, total 5625k
efifb: mode is 1600x900x32, linelength=6400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 200x56
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x4E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: Intel P-state setting Mobile
Load-based policy
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
hidraw: raw HID events driver (C) Jiri Kosina
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
mce: Using 8 MCE banks
microcode: sig=0x406e3, pf=0x80, revision=0xcc
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (4307666248, 0)->(4311108165, -3441917)
registered taskstats version 1
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha256
evm: HMAC attrs: 0x1
Magic number: 11:791:576
rtc_cmos 00:02: setting system clock to 2019-07-24 09:33:15 UTC (1563960795)
PM: Checking hibernation image partition /dev/system/swap
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
psmouse serio1: elantech: Elan sample query result 05, 20, 97
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2096K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2020K
Freeing unused kernel memory: 612K
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Initializing machine ID from random generator.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
clocksource: Switched to clocksource tsc
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.14-lp151.28.10-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.14-lp151.28.10-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] radeon kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
ATPX version 1, functions 0x00000033
ATPX Hybrid Graphics
checking generic (90000000 57f000) vs hw (80000000 10000000)
radeon 0000:03:00.0: enabling device (0500 -> 0503)
[drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x3809 0x83).
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c180 irq 126
checking generic (90000000 57f000) vs hw (90000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vga_switcheroo: enabled
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
ATOM BIOS: Lenovo/Compal
[drm] GPU not posted. posting now...
radeon 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 8137640 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading hainan Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88045fd22c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88045fd22c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88045fd22c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88045fd22c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88045fd22c10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: radeon: MSI limited to 32-bit
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Initialized radeon 2.50.0 20080528 for 0000:03:00.0 on minor 0
usb 1-1: new low-speed USB device number 2 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
ATPX version 1, functions 0x00000033
ATPX Hybrid Graphics
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-11: Samsung SSD 860 QVO 1TB, RVQ01B6Q, max UDMA/133
ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: ATAPI: PLDS DVD-RW DA8A6SH, GL61, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8A6SH GL61 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 1-1: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C05A.0001/input/input6
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
[drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 1
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
fbcon: inteldrmfb (fb0) is primary device
usb 1-4: new high-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=5986, idProduct=0671
usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-4: Product: Lenovo EasyCamera
usb 1-4: Manufacturer: Bison
usb 1-4: SerialNumber: 200901010001
usb 1-5: new high-speed USB device number 4 using xhci_hcd
usb 1-5: New USB device found, idVendor=0bda, idProduct=0129
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
usb 1-7: new full-speed USB device number 5 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
NET: Registered protocol family 38
PM: Starting manual resume from disk
PM: Hibernation image partition 254:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
raid6: sse2x1 gen() 9655 MB/s
raid6: sse2x1 xor() 7341 MB/s
raid6: sse2x2 gen() 12377 MB/s
raid6: sse2x2 xor() 8429 MB/s
raid6: sse2x4 gen() 14448 MB/s
raid6: sse2x4 xor() 8663 MB/s
raid6: avx2x1 gen() 19955 MB/s
raid6: avx2x1 xor() 14008 MB/s
raid6: avx2x2 gen() 24238 MB/s
raid6: avx2x2 xor() 15494 MB/s
raid6: avx2x4 gen() 28068 MB/s
raid6: avx2x4 xor() 17048 MB/s
raid6: using algorithm avx2x4 gen() 28068 MB/s
raid6: .... xor() 17048 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, assert=on
BTRFS: device fsid 38e18b92-372c-4193-93f0-7fd2d39daf7c devid 1 transid 2563 /dev/dm-2
BTRFS info (device dm-2): disk space caching is enabled
BTRFS info (device dm-2): has skinny extents
BTRFS info (device dm-2): detected SSD devices, enabling SSD mode
systemd-journald[159]: Received SIGTERM from PID 1 (systemd).
systemd: 18 output lines suppressed due to ratelimiting
BTRFS info (device dm-2): disk space caching is enabled
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP0] (on-line)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
input: PC Speaker as /devices/platform/pcspkr/input/input8
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc900019a9000, 50:7b:9d:4c:44:91, XID 14100800 IRQ 129
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Adding 16777212k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:16777212k SSFS
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
iwlwifi 0000:02:00.0: base HW address: dc:53:60:72:82:9c
snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone2: failed to read out thermal zone (-61)
iwlwifi 0000:02:00.0 wlan1: renamed from wlan0
ahci 0000:00:17.0: port does not support device sleep
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88045fd22c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88045fd22c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88045fd22c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88045fd22c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88045fd22c10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
systemd-journald[851]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1563960811.425:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=1287 comm="apparmor_parser"
audit: type=1400 audit(1563960811.445:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1301 comm="apparmor_parser"
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810011003110e00
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0671)
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: hci0: Intel firmware patch completed and activated
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
NET: Registered protocol family 17
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fuse init (API version 7.26)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
ACPI Error: Needed type [Reference], found [Integer] ffff8803911403a8 (20170303/exresop-69)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20170303/dswexec-427)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._Q1D, AE_AML_OPERAND_TYPE (20170303/psparse-516)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
ACPI Error: Needed type [Reference], found [Integer] ffff8803fb647e58 (20170303/exresop-69)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20170303/dswexec-427)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._Q1D, AE_AML_OPERAND_TYPE (20170303/psparse-516)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
ACPI Error: Needed type [Reference], found [Integer] ffff880466cee510 (20170303/exresop-69)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20170303/dswexec-427)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._Q1D, AE_AML_OPERAND_TYPE (20170303/psparse-516)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
ACPI Error: Needed type [Reference], found [Integer] ffff8803abd45ee8 (20170303/exresop-69)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20170303/dswexec-427)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._Q1D, AE_AML_OPERAND_TYPE (20170303/psparse-516)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
ACPI Error: Needed type [Reference], found [Integer] ffff88038a5721f8 (20170303/exresop-69)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20170303/dswexec-427)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._Q1D, AE_AML_OPERAND_TYPE (20170303/psparse-516)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready